Conversion Kit from Mini to Size 1 (stroller and Cobra)
Converts bingo mini frames to accept the bingo evo size 1 seat unit, extending the growth of the solution (size 1 seat unit must be purchased separately).
Spacer Fabric 2010-4101-099
Wipe Down Cover 2010-4101-299
Spacer Fabric 2010-4201-099
Wipe Down Cover 2010-4201-299
Spacer Fabric 2010-4301-099
Wipe Down Cover 2010-4301-299
Size 0 80mm high x 100mm deep
2880-3009-346
Size 0 85mm high x 115mm deep
2880-3007-100
Size 1 105mm high x 130mm deep
2880-3007-310
Size 0 150mm high x 105mm deep
2880-3007-500
On velcro attachment. Also includes foam spacer which adheres behind Sacral insert where required. Spacer adds thickness - dimensions 10cmx18cm
2006-2510-000
Velcro attached under upholstery. 22.5cm (W) x 10.5cm (D). Height: 2cm tapering down to 1cm
2006-0505-000
Option to contour standard flat cushion. Velcro attached under upholstery
2006-0660-000
Size 1 9cm(D) x 6.5cm(W) x 9cm(H)
2880-1651-346
Must be worn when stroller is used for Vehicle Transportation
2006-6551-000
To protect feet from the hard footplate surface
2880-5305-000
Spacer block to reduce lower leg length by 4cm.
2880-5321-000
Strap inner circumference 15-23cm.
2880-6101-000
Cannot be used at the same time as Grab Rail
2880-7110-000
For smaller trunk cut out.
2880-7180-000
Cannot be used at the same time as therapy tray
2880-7250-346
With mounting bracket for attachment to mobility base. Fits all sizes.
2880-8275-000
With mounting bracket for attachment to mobility base. 120mm diameter for “C Type” bottle. Fits all sizes.
2880-8253-000
For QR mounting of IV pole to second base (Cobra or other indoor base)
2880-8275-050
Size 1
2880-8058-000
2880-7501-346
2005-6930-000
2880-8440-000
The seat unit easily transfers out of the stroller base and into the Cobra indoor base for feeding and activity times. Lower down the floor for playing and activities, and raise up to a table for meal time! Tilt settings can still be adjusted in the same way as the stroller base.
Size 0
2880-8720-000
Separate seat unit for use with the Cobra Base if a combined stroller and seat unit is not purchased. This is also a great option if two seat units are preferred to avoid swapping the seat unit between the stroller and Cobra bases. Must be purchased with upholstery.
One Size
2880-0010-000
Connection mount that allows two strollers to be connected one in front of the other for an additional sibling. The strollers are able to be easily detached and used separately where required, providing flexibility when travelling with or without siblings.
This is not available for use with a size 3 Bingo Evo. This can be used to connect either: bases of the same size (and corresponding sized Bingo Spex strollers), or the Bingo Mini and Evo Size 1. It is not suitable for use between any other size combinations.
Please fill out an additional script form to order the 2nd stroller unit with a unique configuration and accessories.
Please note that this can only be fitted at the time of ordering both stroller units (Medifab cannot retrofit this attachment).
2880-8630-000
Recommended for purchase with Twin Stroller configuration due to the increased combined weight and inertia when both strollers are connected. 2880-8452-000